Ailun Screen Protector for Apple iPhone 8,7,6s,6 [4.7-Inch] 3Pack, 2.5D Edge Tempered Glass Case Friendly

Instructions were clear. First the wet pad and then the dry pad (both supplied in packets for each of the provided screen protectors). Then the dust remover. This left visible "sticky" impressions on the phone's glass screen, which I didn't like. I washed and dried screen once more before installation. In future, I'll use the dust remover first, then wash and dry the screen.When I installed the screen I missed the center by just a bit. So I pulled up on a corner and released the protective screen. Then I more carefully aligned it and placed it over the phone's screen. It sealed up very quickly with no problem.As instructed a single tap with my finger on the center of the protector resulted in it sealing to the phone's screen and eliminating all air bubbles.Simple and straightforward - I still have two screens left when the protector needs changing. A quality product at a reasonable price.

Easy to understand and install to phone screen. There doesn’t seem to be any impact to the touch sensitivity or blurring of display, so pretty good!

Good price, easy to apply, good protection.These screen protectors will break over time and need to be replaced.Getting in 3 in this pack is handy so a spare is ready when needed.

Affordable choice and good quality as any other, the ones I got were about a mm too narrow for my iPhone 8.

Installed on an iPhone 6s and an iPhone 8 on the same day.Installation:The instructions were clear and easy to understand. I washed my hands well with dish detergent to remove as much oil as possible. The iPhone 8 was first. I was able to get the glass very clean and there were no scratches on the existing screen. I did a pre-fit examination to see how the new screen protector would align with the existing screen. I noticed on both the iPhone 8 and the 6s that the screen protector only covers the part of the glass where the viewing area is, not the unlit glass portion around the edges. This is ok for me, but worth noting.When applying the screen protector, i started at the top of the screen to get it aligned, then gently flexed the screen protector to allow the adhesive to flow down and away to try to prevent bubbles. As soon as the glass made contact, I ran my finger down the center of the screen from top to bottom to try getting the center to adhere first and again to eliminate bubbles. It worked perfectly and the screen looks amazing.For the 6s, I tried the same thing, but somehow some bubbles looked trapped in the adhesive on the edge. I worked hard pressing the screen and scraping towards the edge to remove them, but though I was able to get them very small, they looked like little blisters. I briefly considered removing the screen (In the 3-pack, I still have one left) and trying again. I decided to leave it be since it’s my work phone and it’s better than the old cracked screen protector.I woke up the next morning and noticed that the bubbles are gone!!! They somehow migrated out overnight!!! I’m glad I left it alone.I saw the note in the instructions about the 1 in 10,000 iPhones having a halo effect. I did not experience this problem on these phone models with this screen protector.I’ll try to come back and review the scratch resistance, but I’m coming from a plastic screen protector, so I doubt I’ll have issues being pleased with this. The screen is so much more responsive that with the plastic version. I’m very happy with this purchase.

Works well!

I am fully satisfied with the price and how easily it installed... some of these can be finicky with air bubbles, or the criticality of aligning the cutouts in the glass with the phones earpiece and home button, but this was a pretty quick and simple replacement of a previous protector that I cracked by dropping on stones.Unlike my previous protector which had a cutout for the front camera lens, this one does not and I honestly can't see any lack of clarity in that mode, so it is probably pointless... it also is a major contributor to trying to get things accurately aligned on that type, so this makes the install all the less necessity for precision. On further reflection, I remember being on trips and trying to take selfies and constantly having to stop and clean out the divot in the screen protector for the front camera, because being kept largely in one of my pockets, that area filled with pocket lint fibers or a part of a finger print that didn't quickly just wipe away rubbing against my clothes, it took a more pronounced effort... unfortunately, there are a number of selfies from trips where I didn't realize how dirty it was and well after leaving a photo opportunity I noticed that the resulting picture was "hazy"... without that opening, the screen can be quickly and adequately cleaned with a simple swipe with a shirt or a rub against my jeans. So I think the lack of the cutout for the front camera is even a better option!The kit provides all the necessary tools to install without headaches: lint-free alcohol cleaning cloth, lint-free drying cloth, tack strip for removing any lint, and adhesive "handles" to hold/support/align the glass protector during install. The only other thing required is good eyesight, perception, and enough patience... Things they can't fit in the box.I recommend this if you are looking for a good protector that make you rip your hair out while not looking to overspend. I see the same negative comments on all the different protectors about how one did not fit properly, or another didn't keep air bubbles out, etc.... I have installed probably less than 10 protectors in my lifetime so I am no pro at this, but I can tell you, most of those issues are likely because the wrong protector was ordered, the screen wasn't cleaned properly (or remained clean through the duration of the install (I had to lock one of my cats in the bathroom for the install because she kept coming up to see what I was doing and certainly would have dropped a random hair or dander that would cause those stubborn air bubbles), but the most likely issue with failed installs is that person doing something wrong or being impatient.One issue I had worth noting is that I did have a couple small air bubbles that seemed to not go away no matter how much I tried during the initial install. they were only visible when the screen was off (black) and were essentially undetectable with the screen illuminated... I figured for $4 that was nothing to be bothered by, it didn't affect the use/enjoyment of my phone in the slightest, by the next morning the bubbled seemed to diffuse on their own, so exercise patience.If I could remove my broken protector, clean the table top area I was working on it to avoid dust, clean the phone, prep it and the protector and have it installed within 10-15 minutes and have it bubble-free and well aligned, then anyone can do it. I can't see paying several times more for another protector that has good reviews and you assume to be better because they charge more for it, when this works just as well.

The screen protectors are great with the exception of the edges. It seems like they lost some of their adhesive. Besides that, they are good

Perfect size, easy installation, great value...

Great product.. easy to install

Good packing, and product quality. Easy to apply, screen viewing and touch works good with it also.Good purchase. Recommended.

Ottimo

Buen producto. Se ajusta perfectamente a la pantalla